10.2. The block of an inflatable safety cushion on a steering wheel

Removal

PERFORMANCE ORDER
1. Switch off ignition, having put a key in position "O".
2. Remove a wire of mass of the accumulator (–).
Prevention

At the same time data of the store of malfunctions in the engine or an anticreeping code of radio are erased. Before shutdown of the battery it is necessary to read indications of subsection 14.1.7.


3. Unscrew 2 bolts of the block of an inflatable safety cushion at the left and on the right on a reverse side of a steering wheel, holding at the same time the block.
4. Remove the block from a steering wheel and Take the wire plug on its reverse side.

Installation


Prevention

If the pillow was inflated, then it is necessary to replace a steering wheel. Observe indications for the address with a pillow.


PERFORMANCE ORDER
1. Connect the electric socket to the block of an inflatable safety cushion, at the same time the click has to be heard.
2. Insert the block, screw up two fixing bolts with m 6 N.' moment.
3. Attach a wire of mass of the battery (–).
4. If are available, expose time on hours, and also an anticreeping code of radio.