1. Pass plugs (38b) and (38s) through openings in a steering wheel. |
|
2. Spread a steering wheel so that marking of a shaft and wheel coincided. |
3. Screw in new самоконтрящийся a bolt with a secret head and tighten it with m 80 N.' moment, at the same time the assistant has to hold a steering wheel. |
4. Put the block of an inflatable safety cushion. |
5. Make a trial trip and at the movement on a straight line check the provision of a steering wheel. The upper edge of a cross-piece has to stand horizontally. |
6. In case there is an inclination, it is possible to displace on one tooth a nozzle on vents of a steering shaft.
Prevention
If this shift of a steering wheel is not enough, check a convergence of forward wheels.
|
7. Track the control indicator of the block of an inflatable safety cushion at full turn of a steering wheel against the stop in both directions at the working engine, the control radiator should not light up. |
8. Check a blinking light and shutdown of the index of turn after turn.
Prevention
The dirty or sticky steering wheel can be cleared by means of a neutral household cleaner and slightly warm water. Do not apply when cleaning a wheel of abrasive powders or pastes.
|