11:15. Adjustment of the parking brake

The parking brake needs to be adjusted if after 5-fold pressing a brake pedal the brake effect is not felt.

1. Unscrew on one wheel bolt on both back wheels.
2. Raise the car behind.
3. Turn a wheel so that the opening under a bolt approximately under 45" specified back up.

Wheels with disks from light metal need to be removed.

4. The screw-driver 4,5 mm wide through a carving opening turn a castor (105) of adjusting adaptation until it is impossible to turn a wheel a hand (at the released emergency brake). During adjustment turn a wheel a hand.
5. Direction of turn: the left wheel – from below up, the right wheel – from top to down.
6. Then again turn an adjusting castor back on 5–6 teeths, brake shoes do not slide yet.
7. In the same way adjust a castor (105) on other wheel.
8. Put in action the parking brake several times with effort of 400 N (the corresponding 40 kg), pressing a pedal a leg.
9. After that check whether completely the back wheel freely rotates at the released pedal. Otherwise repeat adjustment.
10. Twist wheel bolts. Lower the car on the earth and tighten them cross-wise with m 110 N.' moment.