13.1.13. Dashboard

60. Spring clips
61. Wire bracket
62, 63. Polar shtekkerny socket
A1. The combined device

Removal

PERFORMANCE ORDER
1. Disconnect a weight(s) wire from the plug of the rechargeable battery.
Prevention

At the same time the anticreeping code of radio is erased. Before a detachment of wires see subsection 14.1.16.


2. The car without adjustment of provision of a steering wheel concerning the driver: remove a steering wheel.
Prevention

Follow rules of precaution at the handling of the device of an inflatable safety cushion.


3. The car with adjustment of provision of a steering wheel concerning the driver: extend completely steering wheel in the direction of the driver.
4. Carefully enter a hook for raising of brush springs between an upholstery and the dashboard and turn it on 90 °. If necessary such hook can be made most.
5. If there is no such hook, remove the lower protection cover.
6. Take from below behind the dashboard and evenly squeeze out an insert without distortion.
7. Evenly extend the dashboard.
8. Deblock brackets for fastening of electric shtekkerny sockets (62, 63) and remove these sockets. Take the dashboard.

Installation

PERFORMANCE ORDER
1. Spread both shtekkerny sockets and fix them cave-in of brackets.
2. Insert without distortion the dashboard into an opening, press it and record.
3. If it is dismantled, install the lower protection cover.
4. If necessary establish a steering wheel.
5. Connect a weight(s) wire to the plug of the rechargeable battery. Determine time on hours and enter an anticreeping code for radio.