8.3.4. Specifications of system of injection and power supply of the diesel
ENGINE
| |||
2,0 l
|
2,2 l
|
2,5 l
| |
Rotation frequency when idling at a working temperature> 60 °C, rpm
| 700 – 800 | 690 – 790 | 610 – 710 |
at launch of the cold engine / warmed up <30 °C, rpm
| 800 – 900 | 690 – 790 | 610 – 710 |
The beginning of giving of the pump OKW after VMT
| 14±0,5 | 14±0,5 | 14±0,5 |
The hydrogate "Is included" rpm
| 1250±50 | 1000 | 1000 |
"Is switched off" by rpm
| 2500±50 | 3500 | 3500 |
System of recirculation of the cooling gases "Is included" rpm
| 1050±50 | 1000 | 1000 |
"Is switched off" by rpm
| 3200±50 | 3500 | 3500 |
Maximum frequency of rotation of the engine, rpm
| 5000 – 5300 | 5200 – 5600 | 5200 – 5600 |
Volume giving of the fuel pump later 30 sec., m3
| 1501) | 2502) | 2502) |
Pressure of supply of fuel when idling, bar
| 0,3 | 0,1 | 0,3 |
at full loading, bar
| 0,5 | 0,3 | 0,5 |
The vacuum pump at a temperature of cooling liquid below 20 °C and after 30 sec. of work in the mode of idling, Mbar
| 700 | 700 | 700 |
Pressure of injection of nozzles (new nozzles), bar
| 115 – 125 | 115 – 125 | 115 – 125 |
The nozzles which were in the use, bar
| 100 | 100 | 100 |
1) with a frequency of rotation of a shaft of a starter over 150 rpm
2) with a rotation frequency idling