3.2.14. Saddles of valves in a head of the block of cylinders
2,0 L ENGINE
|
Valve saddle
|
Inlet valve
|
Final valve
|
| Valve saddle width |
1,2 – 1,7 mm
|
1,7 – 2,0 mm
|
| Valve saddle corner |
45 °
|
45 °
|
| The correcting corner from above |
15 °
|
15 °
|
| The correcting corner from below |
65 °
|
65 °
|
| Admissible radial beating |
0,03 mm
|
0,03 mm
|
| Min. Distance "a1" |
0,1 – 0,5 mm
|
0,1 – 0,5 mm
|
| Min. Distance "a2" |
– 1,0 mm
|
– 1,0 mm
|
a1 – the minimum distance between a plate surface of the valve and bottom edge of a head of the block of cylinders for new valves and saddles of valves.
a2 – the minimum distance between a plate surface of the valve and bottom edge of a head of the block of cylinders after completion of saddles of valves and grinding in of valves.