3.2.13. The directing valves

1. Remove the valve.
2. Check landing of a maslootrazhatelny cap of a core of the valve (205). If the cap leaky adjoins to a valve core, replace a guide of the valve (204) (work for repair shop). 70 – a head of the block of cylinders, 206 – a valve saddle.
3. Clean a guide of the valve (204) a brush (diameter about 20 mm).
4. Enter the valve into a guide from the combustion chamber and check a gap of movement of the valve forward and back. At the same time in a guide of the valve there should not be a notable gap.
5. Otherwise the guide of the valve should be replaced (work for repair shop).