3.1.3.3. Functioning
Ventilation of the engine in the range from "idling to partial loading"| 1. Goryacheplenochny measuring instrument of air mass 2. Cover of a head of the block of cylinders 3. Oil separator camera Ventilation top partial / full loading 4. The highway of the soaked-up air 5. The highway of the deleted air Ventilation top partial / full loading 6. Butterfly valve 7. Throttle with a diameter of 1,1 mm 8. The soaking-up tube 9. Highway of removal of air |
10. Support of the pump of the amplifier of steering 11. Oil separator camera 12. Space for a crank 13. A recirculation pipe for oil (siphon) 14. Oil pallet 15. Case of management 16. Cylinder crank case 17. Head of the block of cylinders 18. Chain case A. Fresh air B. The blown gases D. Connecting element |
Mix of the ventilated gases is sucked in in the combustion chamber from the camera of a crank (12) via the camera of a separator of oil (11) and the highway of removal of air, and also a throttle (7) in power setting from "idling to average partial loading". In an oil separator oil separates from gas mix and comes through a by-pass opening and a by-pass pipe (13) to the oil pallet.
In order to avoid penetration of slags into engine oil a part of the soaked-up fresh air separates in a connecting element (D) and goes to the krivoshipny camera through the highway of the deleted air (5), the camera of a separator of oil (3), a case of a chain (18) and the case of management (15).