Visual control of leak of oil

1. At the oiled engine at a high consumption of oil check where oil follows.
1a. Open a cover of an oil-filling opening and check consolidation for lack of porosity or damage.
1b. System of ventilation of a case: for example, a ventilating hose from a cover of a head of the block of cylinders to the case of a butterfly valve.
1 century. Consolidation of a cover of a head of the block of cylinders.
1 g. Consolidation of a head of the block of cylinders.
1. Consolidation of an oil filter: cover of an oil filter.
1e. Carving stopper of a masloslivny opening (sealing ring).
1zh. Consolidation of the oil pallet.
1z. Epiploons in front of and behind a distributive and bent shaft.
2. As in the presence of thinnesses in most cases oil is distributed on rather big surface of the engine, it is, at first sight, impossible to define oil leak. By search it is expedient to arrive as follows.
2a. Wash out the engine. For this purpose sprinkle the engine standard low-temperature cleaner and after short-term endurance wash out a water stream. Previously close the generator a plastic cap.
2b. Pollinate lime or powder of talc of the place of separation and consolidation outside on the engine.
2 century. Check oil level, if necessary add oil.
2 g. Carry out a trial trip. As oil at the hot engine becomes liquid and thanks to it will appear in points of leaks rather, this trial trip should be carried out on a piece about 30 km on the high-speed highway.
2. Then survey the engine a lighting lamp, localize the leaky place and eliminate defect.