13.1.19.1. Diagnostics of malfunctions of brushes of screen wipers
|
REASON
|
WAY OF ELIMINATION
|
|
Brushes slip
| |
| The rubber brush is polluted | Clear a rubber brush a rigid nylon brush and solution of detergent or alcohol. |
| Обтрепавшиеся protirochny lips, rubber vykroshitsya or wore out | Replace a rubber brush. |
| Rubber underwent aging, a surface with cracks | Replace a rubber brush. |
|
In a cleaning zone the water remains at once roll down in drops
| |
| The windshield is polluted by a politurny varnish or oil | Clean a windshield a pure rag and silicone stain remover. |
|
The screen wiper brush well clears in one party, in another – it is bad
| |
| The rubber brush on the one hand is deformed, does not "overturn" any more | Insert a new rubber brush. |
| The lever of a brush of a screen wiper is overwound | Carefully unscrew the screen wiper brush lever in the opposite direction until normal vertical position is reached. |
|
Surfaces are not cleared
| |
| The rubber brush jumped out of a frame | Carefully insert a brush into a frame. |
| The screen wiper brush does not adjoin evenly any more to glass as spring guides or guards are bent | Replace a screen wiper brush. |
| Too low pressure of a clip because of the screen wiper brush lever | This defect is observed first of all when the spare brush is incorrectly established. Slightly oil the hinge of the lever of a brush of a screen wiper and spring or install the new lever. |