13.1.17. Antenna

77, 78. Bolts

79. Top part of consolidation

80. Lower part of consolidation

81. High-frequency wire

82. Electric socket

M11. Automatic antenna

Removal

PERFORMANCE ORDER
1. Disconnect a weight(s) wire from the plug of the rechargeable battery.
Prevention

At the same time the anticreeping code of radio is erased. Before a detachment of wires see recommendations of subsection 14.1.7.


2. Open a trunk lid, release spring clips and Take a side covering.
3. Unscrew a wire for connection with the case together with a bolt (77).
4. Unscrew the antenna below on the holder (78) and Take it from below from the rubber plug in a wing. Disconnect from plugs an antenna wire (81) and if is available, the line of management (82).

Installation

PERFORMANCE ORDER
1. Check the rubber plug in a wing for lack of porosity or damage, if necessary replace it.
2. Enter the antenna from below and insert its spherical head into the lower part of the plug.
3. Spread the top part of the plug and record it in the lower part.
4. Screw the antenna on the holder.
5. Screw on a body a wire for connection of the antenna with the car case.
6. Attach an antenna wire to the plug. In the presence of the antenna with remote control connect the electric line of management to the plug.
7. Get and fix by spring clips a side covering.
8. Attach a weight(s) wire to the plug of the rechargeable battery. Determine time on hours and program an anticreeping code for radio.