13.1.11.4. A lamp in a lamp of illumination of registration plate

PERFORMANCE ORDER
1. Unscrew two screws (46) on a lamp of illumination of registration plate (E19/1) and remove wires (47).
2. Extend a sofitny lamp from contact springs. If the lamp holder leaky enters contact springs, then if necessary carefully turn in them.
3. Insert a new lamp.
4. Check consolidation for porosity or lack of damage, if necessary replace it.
5. Attach a lamp of illumination of registration plate, insert it and fix by two screws, at the same time pay attention to normal landing of a sealant.