12.7. Internal covering of doors

Driver's door
1. Window regulator handle
2. Lock socket
3. Deepening for the handle
4. Covering 		5. Internal covering of a door
Instruction: on back doors it is necessary to carry out work as appropriate

Removal

PERFORMANCE ORDER
1. Unscrew the socket of the lock (2) the screw-driver and remove it.
2. Completely lower door glass by means of the handle.
3. Remove the window regulator handle for what the small screw-driver press a lock hook on a covering. Lower a covering in the direction of an arrow down and remove.
4. Remove the handle from an axis, remove an expansion washer.
5. Blendu (3) for actuating of a door disconnect fingers or the screw-driver from an internal covering of a door from within and remove.
6. Unscrew the screw (6) on the mechanism of management of a door from within.
7. Wring out a covering (4) under an armrest in a door pocket and unscrew the screw with crosswise shliyets on a head.
8. Circularly slightly disconnect an internal covering of a door from a door tin.
9. Wring out a covering of a door from a door tin from the lower party and sideways the wide pallet or the screw-driver, at the same time disconnect spring clips. To begin with the lower party of a covering.
Prevention

Lay material not to scratch a varnish.

10. Open a stopper (7) of the mechanism of actuating of a door from within and disconnect the mechanism (8). At "electrically an adjustable seat of the driver" instead of the mechanism flexible draft is built in, disconnect it.
11. Disconnect the wire plug from a door covering.
12. Pull an internal door covering over the button of blocking of a door up and take from a door tin.

Installation

PERFORMANCE ORDER
1. Before assembly track the correct installation of the pressurizing film. Small damages of a film tape, at big cracks replace a film.
Prevention

At the plant the holder of fastening of an armrest priklepyvatsya only after installation of a film. When replacing a film cut out this area and stick a vnakhlestka or condense with the gluing tape.
2. Put on the wire socket.
3. Insert the mechanism of actuating of a door from within and record it.
4. Replace the damaged spring clips. Establish an internal covering from above over the button of blocking of a door, enter into the tire for a sealant and along with spring clips in openings in a door tin.
5. Press fists an internal covering of a door in the field of spring clips.
6. Twist the screw with crosswise shliyets below an armrest. Impose a covering.
7. Fasten management of a door of two screws from within. Impose a handle cover.

8. (3) handles of a window regulator establish a gap washer by big diameter to a door covering.
9. Get the handle on an axis. At an open window the handle has to be directed obliquely forward up.
10. Pull from below a cover (1) over the handle (2), at the same time track that the head of a cover entered a flute on a handle axis. Advance a covering so, the fixing hooks (shooter) will not enter gearing yet.
11. Raise glass by means of the handle up.
12. Insert a covering for the door lock from above and from below fix by the screw.