12:12. Window regulator engine

Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Carefully remove the pressurizing film in the lower area.
Prevention

The film is easily torn.

3. Disconnect the plug (2) from the window regulator engine.
4. Forward door: unscrew the engine of a window regulator (M10/3) with internal bolts (1) and remove.
5. Back door: dismantle a window regulator, see соотв. section. Then unscrew the engine of a window regulator (M10/5) with internal bolts (1) and remove.

Installation

PERFORMANCE ORDER
1. Before installation slightly grease with universal lubricant an engine gear wheel.
2. Install the engine and tighten bolts with m 15 N.' moment.
3. Back door: establish a window regulator.
4. Put on the wire socket.
5. Attach the pressurizing film without folds.
Prevention

Do not damage a film – it has to provide faultless sealing.
6. Check functioning of a window regulator.
7. Establish an internal covering of a door.