12:10. Back window regulator

1. Window regulator
2. Ram
3. Openings for fastening of secret rivets
4. Lock bracket
5. Window regulator tire
6. The lowered glass
7. Secret rivet of 4,8 mm


1. Remove an internal covering of a door.
2. Carefully remove the pressurizing film.

The film is easily torn.

3. Disconnect a lock bracket from the window regulator tire.
4. Extract the lowered glass with the tire of a window regulator from the ram down and move up in the window tire. Record glass a plastic or wooden wedge that it did not drop out.
5. Window regulator приклепан. Ream four rivets a drill of 4,8 mm. Track at the same time that the drill did not enter an internal tin of a door. For a rivet special pincers are necessary for secret rivets.
6. Take a window regulator from below. The power window is taken together with the engine. Disconnect a wire of the power window.


1. Insert a window regulator into a door and a priklepayta pincers for secret rivets. If is not present at the disposal of pincers, the window regulator can be fixed by screws and nuts. Before a vvinchivaniye to grease screws with the protectant, for example, of Loctite 270 or Omnifit.
2. Carefully lower glass and establish a lock bracket.
3. Connect electric wires.
4. Attach the pressurizing film, having tracked that there were no folds.

Do not damage a film – it has to be faultlessly tight.

5. Establish an internal covering of a door.