1.8.6. Cruise control

With its help it is possible to keep any speed exceeding 40 km/h including the switch.

1. Fixing (concern the switch).

Acceleration (hold the switch).

1. Fixing (concern the switch).

Delay (hold the switch).

In the normal mode the car accelerates to considerable speed an accelerator pedal. This speed will be kept by short contacts in situation 1 or 2 and the pedal of an accelerator can be lowered.

If it is required to increase speed for example for overtaking – use an accelerator pedal. If a pedal to release that again automatically again earlier chosen speed is established.

If the recorded speed needs to be raised or lowered slightly (for example, for journey of the traffic light), hold the switch in situation 1 or 2 before achievement of desirable speed. If to release the switch again, then new speed will be recorded.

Short contacts of the switch in situation 1 or 2 speed will increase or go down on 1 km/h.

Cruise control, the switch to move switching off for a while to a position 3. The cruise control is switched off also during the using of a pedal of a brake or reduction of speed to less than 40 km/h (for example, in mountains).


If at a speed more than 40 km/h to transfer the switch to situation 4, then the speed entered before switching off will be established again.

If to turn a key in the lock of ignition on 1 or O, that last the remembered value of speed will be erased.

Example: If when driving under a bias of action of braking of the engine it is not enough, then the entered speed will be a pereshagnuta and in case of need it will be necessary to brake. If the brake was not used, then as soon as the slope ends, the speed entered earlier will be established again.

Memory needs to be used at clear trail in the remembered speed. Not to exceed engine turns, it is impossible to establish N when driving about a cruise control.