1.7.4. The combined switch

1 – Passing beam (position of the light rotary switch ).

2 – Driving beam (position of the light rotary switch ).

3 – A light signal (driving beam regardless of position of the light rotary switch).

4 – Turn to the right.

5 – Turn on the left.

In cases 4 and 5 the combined switch is fixed.

The return switching happens at the big movements of a wheel automatically.

At small changes of the direction only to press on the combined switch and to hold.

6 – Inclusion:

  – windscreen washer

  – a faroochistitel (only at provisions or   the light rotary switch).

At inclusion janitors will also earn.

Nozzles of windscreen washer will automatically heat up.

7 – Inclusion of janitors

About – janitors are switched off;

I – a sink with intervals;

II – the normal mode of a sink;

III – the bystry mode of a sink.

Example: At switching off of turns there is a bystry blinking and scoring of a signal.

If when using the trailer the turn on the car or on the trailer does not light up, then the control bulb for the mode of the trailer can not burn or light up 1 time.

When using janitors on a windshield various defects can be formed. In this case, and also at a rain it is necessary to include windscreen washers. In the tank for stekloomyvayushchy liquid there has to be always a stekloomyvayushchy mix corresponding for the MV car from a concentrate of S (Sommer) or W (Winter – winter).